4D product information for
Spare wires Power over Ethernet (POE) Injector and Splitter adaptors with DIY microUSB cable/lead
- Product Title: Spare wires Power over Ethernet (POE) Injector and Splitter adaptors with DIY microUSB cable/lead
- Manufacturer/Publisher: Fourth Dimension
- Stock Code: 4D-RPI-POE-IS-DIY
- QuickCode: 17251
- Format: Hardware
- Product Group: Raspberry Pi: USB & Networking etc.
- Condition: New
- Availability: Usually available from stock
Pair of adaptors, one injector and one splitter. This is a Power-over-Cat5 adaptor really, as it is a passive device and does not conform to POE (Power over Ethernet) specs.
Power your Raspberry Pi (or any other system) remotely via an ethernet cable!
Requires a 5V PSU to plugged into the 2.1mm DC input and a cable (not supplied) to go from the 2.1mm DC Socket to the RaspberryPi (2.1mm DC Plug to microUSB)
Supplied with a micro USB cable and three lengths of heat shrink to allow you to solder a micro USB cable onto the splitter to power the Raspberry Pi.
- Price: £11.50 no UK VAT to pay!
- Free UK delivery on orders of £20 or more! (exceptions apply)
Over 80% of products are shipped from stock!
Most orders of less than £20 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £20 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE
If you have a sales enquiry please email our sales department
Unit 16, Arunside Ind. Est., Fort Road, Littlehampton, West Sussex, BN17 7QU, UK. 01903 523222 (full contact details)
If you have any comments or problems please email firstname.lastname@example.org
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Fri, 03 Dec 2021