4D product information for
Two Heatsinks (low profile) suitable for Raspberry Pi, PandaBoard or Beagleboard
- Product Title: Two Heatsinks (low profile) suitable for Raspberry Pi, PandaBoard or Beagleboard
- Manufacturer/Publisher: Various
- Stock Code: VAR-HEATSINK2LP
- QuickCode: 20337
- Format: Hardware
- Product Group: Raspberry Pi: Misc. inc. Spares
- Condition: New
- Availability: Usually available from stock
Two Mini heatsinks suitable for main system-on-chip in a Raspberry Pi, PandaBoard or Beagleboard.
Complete with heat conducting self adhesive tape for optimum heat transfer.
This is the lowest profile heatsink we have found, if you have fitted to your Pi a Real Time Clock (RTC) this will just fit under it though it will touch the battery holder and the RTC may be slightly sloping.
Suitable for all models of Raspberry Pi.
n.b. The voltage regulators also get hot. They are rated for 125 degrees C (30 degrees more than a Raspberry Pi's main chip) so it would be silly to put a heat sink on them!
- Price: £7.00 no VAT to pay!
- Free UK delivery on orders of £10 or more! (exceptions apply)
Over 500 cables and adaptors stocked!
Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE
If you have a sales enquiry please email our sales department
78 Brighton Road, Worthing, West Sussex, BN11 2EN, UK. 01903 523222 (full contact details)
If you have any comments or problems please email firstname.lastname@example.org
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Sat, 15 Dec 2018