Econet Clock

A new design of Econet Clock which uses a microcontroller to generate the clock signal.

There are 8 preset clock configurations in the firmware, which can be selected by means of DIP switches in the case:

DIP	Period (us)	Mark (us)
0000	5.00	1.000
0010	4.00	0.750
0100	4.00	0.500
0110	3.00	0.500
1000	3.00	0.250
1010	2.00	0.500
1100	2.00	0.250
1110	2.00	0.125

NB. The right-hand DIP switch is not used

There are two 5pin DIN sockets on the circuit board, with provision to connect a further two on flying leads to 5pin 0.1" headers. We will be offering these flying leads as add-on items shortly.

Supplied with a 5V PSU (UK plug)

Add to basket

This Econet Clock was designed by Simon Inns © 2017 and is open source.
Copies of the source code and designs are available from Simon's website or from ourselves here ( 59KB)